Copper
Copper in tap water almost always comes from the home's own pipes corroding, not the well. Above the EPA secondary standard it causes metallic taste and the characteristic blue-green staining.
The numbers
| Standard | Value | Applies to | Source |
|---|---|---|---|
| EPA secondary standard (aesthetic) | 1 mg/L | Public water systems (non-enforceable guideline) | US EPA, checked 2026-11-20 |
Treatment families
acid-neutralizer
Copper is unusual among the contaminants on this site: it is rarely in the groundwater. It gets into your glass from your own plumbing, when corrosive water dissolves the inside of copper pipe. EPA’s aesthetic table lists the effects above 1.0 mg/L as metallic taste and blue-green staining — the stains are the pipe, relocated to your tub.
That is why treating the symptom means treating the water chemistry, not filtering copper. The usual driver is low pH — EPA’s aesthetic range for pH is 6.5 to 8.5, with corrosion and bitter metallic taste listed as the low-pH effects — and the fix is raising pH at the point of entry with an acid neutralizer, as covered under acidity. Remove the corrosivity and the staining stops; filter the copper and the pipes keep dissolving.
A useful sampling detail: corrosion contributions are highest in water that has sat in the pipes. Comparing a first-draw sample against one taken after flushing separates “what the well delivers” from “what the plumbing adds.”
Copper also has a health dimension under EPA’s enforceable rules for public systems; that discussion is held for human review per this site’s policy and will be added once signed off. The staining and taste effects above are the aesthetic story only.