Hardness (calcium and magnesium)
Dissolved calcium and magnesium. Heated, they precipitate as scale in pipes, water heaters and appliances; in the sink they make soap scum and spotting. USGS classifies water harder than 180 mg/L as CaCO3 as very hard.
The numbers
| Standard | Value | Applies to | Source |
|---|
Treatment families
water-softener · ion-exchange
Hardness is dissolved calcium and magnesium, and the USGS classification bands (USGS Water Science School, Hardness of Water, accessed 2026-11-20) are the reference scale:
| Band | mg/L as CaCO₃ |
|---|---|
| Soft | 0 – 60 |
| Moderately hard | 61 – 120 |
| Hard | 121 – 180 |
| Very hard | more than 180 |
The damage is mostly thermal. When hard water is heated it deposits solid calcium carbonate — USGS notes the buildup shortens equipment life, raises heating costs, cuts heater efficiency and obstructs flow. Cold-side effects are cosmetic but constant: soap reacting with calcium forms soap scum, and glassware dries with spots and film USGS describes as “not dangerous, but unsightly.”
Hardness has no EPA secondary standard of its own — the staining and deposit effects show up under total dissolved solids in EPA’s aesthetic table — so the USGS bands are the practical scale for deciding whether softening is worth it. There is no safety case for a softener; it is an economics-and-comfort decision about scale, appliances and cleaning.
Softening by ion exchange swaps calcium and magnesium for sodium on a resin bed. One sizing caution from the iron record applies in reverse: iron in well water fouls softener resin, so a hardness test for sizing should come with an iron number.